ndustrial UPS power role?

Industry: UPS power matching load, according to the load rate is converted to load 80% 640W matched UPS, power industry if overload, in the inverter state, often caused by inverter transistor breakdown. In addition, when using UPS, such as fluorescent lamps with inductive load,telecom upstelecom ups  and capacitance can be electric or small load industrial UPS power switch machine should pay attention to the switch machine order:telecom ups boot industrial UPS power, then 1 - 2 minutes the best lag, filled with UPS input working condition, telecom ups then turn on the power switch, load, and load the power switch to open each: a power shutdown in reverse order,telecom ups  switch,telecom ups telecom ups load switch, telecom ups  and then close UPS.telecom ups  The UPS must be in the boot state for a long time, but the computer load every time you want to use the boot, shutdown, as long as the load power switch. UPS power is not frequent open and close the UPS power supply. In the general requirements for closure of UPS power supply,telecom ups  wait at least 6 seconds, re open the power supply of UPS, telecom upstelecom ups otherwise,telecom ups telecom ups UPS power can be in "failed to start" state, this is the UPS power without city power output is not output inverter in normal ondition. UPS cell UPS power line: in power may be due to some reason or nearly depleted depletion.ups compensation and increase the battery life of the battery energy, industrial UPS can long time charging power supply,telecom upstelecom ups  generally not more than 48 hours, with or without load,telecom ups avoiding the fault caused by the battery failure. The new purchase or stored for a long time, before use, should first industrial UPS power source,telecom ups  charging 12 hours. Unused UPS long-term storage,telecom ups  every 3 months, charging 12 hours,telecom ups in the high temperature zone of the online UPS, each charge 2 months. UPS online is not charging, will damage the battery.